BT3保存配置的方法

sai

用 dir2lzm /mnt/live/memory/changes changes.lzm 命令将目录打包成changes.lzm文件，将这个文件拷贝到
U盘或者硬盘的 /BT3/modules/目录下，就能保存配置了，BT网站的原文如下：
Save configuration to USB stick
After having produced the personalization, open the console and digit dir2lzm /mnt/live/memory/changes changes.lzm (changes.lzm or pippo.lzm ...) changes.lzm you have in root folder, paste in USB modules folder (BT/modules). Reboot you have saved setting up. -bzImage
There is an issue after you save to changes.lzm and boot from the module then make new changes and try to save them because you only get the new changes and not the previous. Then create new changes and have to save them. Seems you have to copy /mnt/live/memory/changes to a tmp dir then merge /mnt/live/memory/images/changes.lzm/ onto the tmp dir. Then turn that into a new module to load. -Kinchyle
If you make a subsequent change, you can just save the new change.lzm file in the /BT/modules folder using a different name: ie change1.lzm and change2.lzm and then a subsequent file called change3.lzm all without merging them. -Milon